Network Engineer Level 2

If you’re a fresh graduate from any IT or IS. This course is an excellent option for you to cick start your IT career. The course is in level 2 covers the following modules:

1. IP addressing (IPv4/IPv6), subnetting, OSI and TCP/IP models, Basic networking devices (switches, routers, firewalls, access points)
2.  VLANs and trunking (802.1Q), Spanning Tree Protocol (STP), EtherChannel, Wireless networking basics

3. Routing concepts, Static routing and default routes, Dynamic routing protocols (OSPF mainly, also basics of EIGRP), First Hop Redundancy Protocols (e.g., HSRP)

4. NAT, NTP, DHCP, DNS, Quality of Service (QoS) concepts, SNMP, syslog, TFTP/FTP basics

5. Access Control Lists (ACLs), Port security, VPN basics, device hardening, Fundamentals of automation (REST APIs, configuration management)

6. Working with Firewall (checkpoint)

7. Working with IPS (Checkpoint)

8. WLAN configuration (SSID, WPA2/WPA3, authentication), Wireless architecture components (WLC, APs, LWAPP, CAPWAP)

9. RSTP (Rapid Spanning Tree Protocol) vs STP differences

10. OSPF areas, neighbor adjacencies, LSAs, and DR/BDR concepts
11. IPv6 routing basics (link-local addresses, global unicast)
12. Capsone Project

Provided by the AI Institute of Education, this programme is available by face to face + Bleneded allowing you to study flexibly while balancing work and personal lifes.

The course deepens your understanding of  your previous IT study and experience. The course is an advanced unit in Networking. It focuses on CCNA Cisco certificate, and the major topics, with a very intensive practical lab works.

This Module is a continous study of Network Administration in Level 1. This is a level 2 unit, which contains more advance topics and labs, that are taken from CCNA labs. 

The programme aims to promote an understanding of the advanced network administration level. This includes topics in switching and routing, firewall, NAT, DHCP, DNS, and other advance network topics.